Toilet keeps running: flush valve, fill valve or concealed cistern?
Free tool: Is my water meter showing a leak?
A toilet that keeps running looks like a small problem, but it wastes water day and night, keeps your water meter turning and pushes up the bill from EPAL (Lisbon’s water company) or your local utility. In Portugal many toilets have a concealed cistern built into the wall, with just a flush plate showing, which makes the fault feel harder to reach than it really is.
Which type of cistern do you have
- Concealed cistern (inside the wall, with a flush plate showing): very common in renovated bathrooms and newer buildings. The most common brands in Portugal are Geberit and OLI.
- Close-coupled cistern (the ceramic tank sitting on the back of the toilet): lift the lid and you see the mechanism.
- Old high-level cistern, with a chain or lever, still found in some old buildings in central Lisbon.
All of them have two main parts: the fill valve (the float valve that lets water in up to the right level) and the flush valve (which opens when you press the button and closes so the cistern can refill).
Why the toilet keeps running
From most to least common:
- The flush valve no longer seals. The rubber seal at its base wears, warps or scales up with limescale (water in the Lisbon area leaves plenty). Water trickles into the bowl, the fill valve tops it up, and it never stops. You may see a thin ripple running down the back of the bowl.
- The fill valve does not shut off. It no longer closes, or it is set too high, so water spills into the overflow pipe and down into the bowl.
- A sticking button or cable. On concealed and dual-flush cisterns, the button can stick or the cable can go out of adjustment, holding the flush valve slightly open.
- Grit or limescale in the fill valve. Particles from the mains, especially after water cuts or work on the building, get caught in it.
- Broken or misplaced parts, often after someone has been inside the cistern.
What you can safely check now
- Turn off the water to the cistern. On a close-coupled toilet there is a small isolating valve on the wall behind or beside it. On a concealed cistern, the isolating valve is behind the flush plate. If you cannot find it, close the stopcock for the flat.
- Do the colour test. Turn the water back on, add a few drops of food colouring (or strong coffee) to the cistern and do not flush for a good while. Colour in the bowl means water is getting past the flush valve.
- Check the water level (on a close-coupled cistern, with the lid off). If water is running into the overflow pipe, the fill valve is not shutting off: try lowering the level slightly with the adjustment screw or clip on the float.
- Press the button a few times. If the running stops for a while and then comes back, the button or cable may be sticking.
- Check the water meter with every tap closed and the cistern valve off. If it still turns, the leak is somewhere else (see our guide to a water meter that keeps running).
What NOT to do
- Do not force the flush plate on a concealed cistern. Plates break easily and some have hidden clips.
- Do not bend the float arm on modern fill valves: most are adjusted with a screw or clip, not by bending.
- Do not use bleach tablets or chlorine blocks inside the cistern: they harden the rubber seals.
- Do not unscrew parts with the water on.
- Do not leave it running in the hope it stops on its own; keep the valve closed until it is repaired.
When to call a plumber
Call us if:
- the colour test shows a leak and you cannot reach the flush valve;
- the cistern is concealed and you are not sure how to open it;
- the fill valve keeps overfilling after adjusting it;
- water is running down the wall, under the toilet or into the flat below;
- the flush has become weak or stopped working.
To help us bring the right part, send us on WhatsApp:
- a photo of the flush plate (the brand, such as Geberit or OLI, is often on the plate or behind it);
- a photo of the mechanism with the lid or plate off, if you can remove it;
- a short video of the toilet running;
- your address and floor.
How it usually gets fixed
- Flush valve: a new seal or a complete new flush valve, with the limescale cleaned off.
- Fill valve: cleaning, adjusting or replacing it.
- Concealed cistern: access through the flush plate opening, without breaking the wall. On most Geberit and OLI cisterns the parts are changed from there.
- Very old mechanisms: replacing the whole mechanism with a modern one, when that makes more sense than repairing.
- Weak flush: adjusting the flush volume or replacing the flush valve.
You get a written quote on WhatsApp before any work starts, and a VAT invoice with your NIF (Portuguese tax number). If the same fault comes back, we come back free. Our team speaks English and Portuguese.
If the problem is the toilet not draining rather than the cistern running, see our guide to a blocked toilet.
Get help
If your toilet is still running after these checks, see our emergency plumber page or send us your photos on WhatsApp. We reply fast and tell you what it looks like before we book a visit.