Electric water heater not heating: cold water, lukewarm water or a tripping breaker
A termoacumulador is the electric tank that heats and stores your hot water, usually hung in the kitchen, the marquise (enclosed balcony) or the bathroom. When the morning shower runs cold, it is easy to assume the heater has died. Often it has not: it is switched off, heating at hours you do not expect, or has one worn part that can be replaced. This guide helps you separate what you can check safely from what needs a technician.
If your heater runs on gas (a flame lights when you open a hot tap), it is an esquentador and the guide you want is water heater not working. If your tank is dripping, see electric water heater leaking.
First, which symptom do you have?
It helps to know which of these you are dealing with:
- Cold water and no light on the heater. Possibly no power reaching it.
- The breaker or the RCD trips when the heater switches on, or shortly after.
- Lukewarm water that never gets properly hot.
- Hot water that runs out very quickly, or that is scalding one day and cold the next.
Checks you can do safely
At the fuse box
Many termoacumuladores have their own breaker in the quadro elétrico (fuse box), sometimes labelled by hand. See whether it is down. If it is, put it back up once. If it trips again straight away or after a while, leave it down and skip to the section on when to call.
The timer or programmer
In many Lisbon area homes, especially on a two rate (bi-horária) electricity tariff, the tank is wired to a time switch in the fuse box or a programmer on the heater itself, so it only heats overnight. After a power cut, a clock change or building work, the timer can drift and the tank ends up heating in the middle of the day, or not at all. Check the time is right and the heating periods are on.
The temperature knob
Make sure the knob or the outside display is not on minimum, holiday or frost mode. Someone may have turned it while cleaning.
Give it time
An 80 or 100 litre tank that has been emptied needs several hours to heat up again. If the household has just had several showers in a row, cold water may be all it is.
What each symptom usually means
- No light, breaker on: the safety thermostat may have cut out, for instance after a power surge or overheating. Its reset button sits under the cover and is not something to touch at home.
- Breaker or RCD tripping: nearly always a failed heating element leaking current into the water, or a faulty thermostat.
- Lukewarm water: scale around the element, an element that only partly works, or a worn thermostat. It can also be a thermostatic mixer with a worn cartridge, letting cold water into the hot line.
- Hot water runs out fast: a lot of scale at the bottom of the tank, which takes up space and insulates the element, or a tank too small for the household. Our water heater size tool shows whether the capacity is enough.
- Scalding one day, cold the next: a failing thermostat. Switch it off at the fuse box until it is checked, because water that is too hot is dangerous.
What not to do
- Do not open the electrical cover or try to reset the safety thermostat. There is live current inside.
- Do not keep resetting a breaker that trips. Every attempt is another current leak.
- Do not switch on an empty tank. If you have drained it, the element burns out quickly without water around it.
- Do not block or cap the safety valve. It is there to release pressure as the water heats.
When to call, and what to send us
Call if the breaker trips, if there is no light at all with the fuse box on, if the water is still lukewarm after checking the timer and knob, or if the temperature swings. On WhatsApp, send us:
- a photo of the whole heater and of its rating plate (brand, model, capacity);
- roughly how old it is;
- a photo of the fuse box, pointing out the heater’s breaker if you know which it is;
- exactly what happens (no light, tripping, lukewarm, swinging) and since when;
- your address and floor.
We reply with a written quote on WhatsApp before any work starts; nothing starts without your approval.
Repair or replace?
We repair Vulcano, Bosch, Baxi and Vaillant termoacumuladores up to about 15 years old: heating elements, thermostats, gaskets and safety valves, plus a service with descaling and an anode check. Low end brands, and tanks that are leaking or rusted on the body, we replace, because a repair rarely pays off.
When an element burns out, limescale is often the reason. So when we repair one, we clean out the tank and tell you whether the anode needs replacing, so the new part lasts.
How it usually gets fixed
On the visit we check, with the power off, whether the element and thermostat are sound. If it is the element, we drain the tank, fit a new element and gasket, clear the scale and refill before switching back on. If it is the thermostat, we replace it and check the temperature at the tap. If the tank is no longer worth saving, we remove it and fit a new one, with a new safety valve and the connections checked.
If your electric water heater has stopped heating, have a look at our water heaters and boilers service or send us the photos on WhatsApp. The team speaks English and Portuguese, you get a VAT invoice with your NIF (tax number), and we are rated 4.9 on Google with 1,000+ expats served.